GEARBOX 80W-90



Gearbox and differential lubricant Molybdenum bisulphide MOS2 reinforced Extreme pressure




TYPE OF USES

pecially recommended for noisy or/and loaded gearboxes.

All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfergearboxes and hypo�d differentials without limited slip system operating under shocks, heavy loads andlow revolution speed or moderate loads and high revolution speed.




PERFORMANCES STANDARDS 

API GL4 and GL5 / MIL-L-2105DExtreme pressure lubricant for an efficient anti wear protection, reinforced with Molybdenum bisulphideto handle heavy loads.Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 updateVery high lubricating power which decreases friction and wear.90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or toreduce transmission noise.Suitable for any type of seal and yellow material used in gearboxes design.Anti-corrosion, Anti-foam.




RECOMMENDATIONS

Oil change: According to manufacturers' requirements and adjust according to your own use.




PROPERTIES

Viscosity grade SAE J306 80W-90Density at 15°C (59°F) ASTM D1298 0.902Viscosity at 40°C (104°F) ASTM D445 164 mm²/sViscosity at 100°C (212°F) ASTM D445 21.7 mm²/sViscosity index VIE ASTM D2270 157Flash point ASTM D92 198°C / 388°FPour point ASTM D97 -24°C / -11°F